Related Manuals for Seagate BARRACUDA PRO COMPUTE ST4000DM006
Summary of Contents for Seagate BARRACUDA PRO COMPUTE ST4000DM006
- Page 1 v6 SATA Product Manual Standard models ST8000DM005 ST6000DM004 ST4000DM006 ST2000DM009 100811076, Rev. B November 2016...
- Page 2 Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. PowerChoice and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments.
-
Page 3: Table Of Contents
Seagate® Technology Support Services ........ -
Page 4: Seagate® Technology Support Services
For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/data-recovery-services/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/ Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... -
Page 5: Introduction
Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates parallel ATA, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification. The specification can be downloaded from www.serialata.org. Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... -
Page 6: Drive Specifications
(below mean sea level, max) (–1000 ft to 40,000+ ft) Operational Shock (max at 2 ms) Read 70 Gs / Write 40 Gs Non-Operational Shock (max at 2 ms) 250 Gs 300 Gs Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... -
Page 7: Formatted Capacity
** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. † Seagate does not recommend operating at sustained case temperatures above 60°C. Operating at higher temperatures will reduce useful life of the product. -
Page 8: Start/Stop Times
Spindle speed (RPM) (± 0.2%) 7200 Internal data transfer rate (Mb/s max) 2396 2585 Sustained data transfer rate (MiB/s max) I/O data-transfer rate (MB/s max) 600 (Ultra DMA mode 5) Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... -
Page 9: Power Specifications
9.72 Maximum DC 0.46 0.62 9.74 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... - Page 10 9.01 Maximum DC 0.611 0.500 9.06 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B...
- Page 11 7.33 Maximum DC 0.448 0.430 7.40 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B...
- Page 12 6.10 Maximum DC 0.523 0.302 6.24 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B...
-
Page 13: Conducted Noise
10MHz. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. Note 2.5.3 Voltage tolerance Voltage tolerance (including noise): 5V +10/ -5% 12V ± 10% Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... -
Page 14: Extended Power Conditions - Powerchoicetm
• Saved enabled state, and timer value • Current enabled state, and timer value S.M.A.R.T. Read Data Reports • Attribute 192 - Emergency Retract Count • Attribute 193 - Load/Unload Cycle Count Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... - Page 15 Disable EPC Feature Set PowerChoice Supported Extended Power Condition Identifiers Power Condition Identifiers Power Condition Name Standby_z 01 - 80 Reserved Idle_a Idle_b Idle_c 84 - FE Reserved All EPC Power Conditions Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B...
-
Page 16: Environmental Limits
Non-operating –40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. HDA Temp. -
Page 17: Shock
The maximum non-operating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 2–500 Hz 2Hz/.001g (Random psd) 4Hz/.03g 100Hz/.03g 500Hz/.001g Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... -
Page 18: Acoustics
Test for Prominent Discrete Tones (PDTs) Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. -
Page 19: Reliability
US, please visit our website for numbers in your local and language: http://www.seagate.com/services-software/recover/resources/. An SRS representative will review your case to confirm your eligibility, and to assess whether your data may be recoverable by remote recovery services or whether you will need to send your device to SRS for in-lab servicing. - Page 20 Seagate reserves the right to refuse service to or the return of any storage devices that have been determined to violate these regulations.
-
Page 21: Agency Certification
Judicial Arbitration and Mediation Services. Each party will bear its own costs in arbitration, provided that Seagate reserves the right, in its discretion, to pre-pay certain fees you may incur in connection with the arbitration subject to refund if you do not prevail. -
Page 22: 2.11.3 Fcc Verification
Federal Communications Commission verification or certification of the device is required. Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. -
Page 23: China Requirements - China Rohs 2
The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives. Seagate recommends that data centers be kept clean by monitoring and controlling the dust and gaseous contamination. Gaseous contamination should be within ANSI/ISA S71.04-2013 G2 classification levels (as measured on copper and silver coupons), and dust contamination to ISO 14644-1 Class 8 standards, and MTBF rated conditions as defined in the Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF) section. -
Page 24: Product Warranty
Seagate’s option and at no charge to the customer, if returned by customer at customer’s expense to Seagate’s designated facility in accordance with Seagate’s warranty procedure. -
Page 25: Configuring And Mounting The Drive
• The screws should be inserted no more than 0.120 in (3.05mm) into the bottom or side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 in-lb). Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... -
Page 26: Mechanical Specifications
.138±.015 5 2.000 C L OF DRIVE Figure 4. Mounting configuration dimensions (8TB and 6TB) The image is for mechanical dimension reference only and may not represent the actual drive. Note Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... - Page 27 TEMPERATURE 1.028 MAX CHECKPOINT 60°C MAX 26.11 MM Figure 5. Mounting configuration dimensions (4TB) The image is for mechanical dimension reference only and may not represent the actual drive. Note Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B...
- Page 28 Figure 6. Mounting configuration dimensions (2TB) The image is for mechanical dimension reference only and may not represent the actual drive. Note Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B...
-
Page 29: Serial Ata (Sata) Interface
There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate backplane config- uration. All used voltage pins (V ) must be terminated. Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... -
Page 30: Supported Ata Commands
Sanitize Device - Freeze Lock Ext / 0020 Sanitize Device - Status Ext / 0000 Security Disable Password Security Erase Prepare Security Erase Unit Security Freeze Security Set Password Security Unlock Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... - Page 31 Write FPDMA Queued Write Log DMA Ext Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Without Retries Write Sectors Extended Write Uncorrectable Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B...
-
Page 32: Identify Device Command
LBAs specified in words 100-103. This is required for drives that support the 48-bit addressing feature. Retired 0000 Multiword DMA active and modes supported (see note following this table) xx07 Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... - Page 33 NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support. 112–118 ATA-reserved 0000 Commands and feature sets supported 410E Commands and feature sets supported or enabled 409C 121-127 ATA-reserved 0000 Security status 0021 129–159 Seagate-reserved xxxx 160–205 ATA-reserved 0000 Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B...
- Page 34 Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B...
-
Page 35: Set Features Command
Enable read look-ahead (read cache) feature (default). Report full capacity available At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Note Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... -
Page 36: S.m.a.r.t. Commands
S.M.A.R.T. Disable Operations S.M.A.R.T. Return Status If an appropriate code is not written to the Features Register, the Note command is aborted and 0x 04 (abort) is written to the Error register. Seagate BarraCuda Pro v6 Serial ATA Product Manual, Rev. B... - Page 37 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100811076, Rev. B...