Quick Copy - Kyocera Mita FS-9100DN Operation Manual

Kyocera fs-9100dn: operation guide
Hide thumbs Also See for FS-9100DN:
Table of Contents

Advertisement

Q Q Q Q Job Storage
Job storage stores print jobs either temporarily or permanently,
or in virtual mailboxes, as you click an appropriate radio button
on the printer driver when printing from a computer. If you select
Temporary or Permanent job storage, you can choose to have a
unique number and barcode automatically assigned to each job
as it is stored in the printer. This barcode appears on the printed
document. The barcode reader can be used to reprint the docu-
ment by reading the barcode from the original document or from
a List of Code Jobs. For details on this list, see
Code Jobs on page
3-15.
Job storage requires a hard disk installed in the printer. Howev-
er, printing barcoded job IDs on documents is possible using the
RAM disk feature of the printer. On how to use the RAM disk, see
Operating a RAM Disk on page
Q Q Q Q Virtual Mailbox
Virtual mailbox is part of Job Storage, which stores print jobs on
the hard disk without printing. It enables you to retrieve jobs later
from the operator panel, the Print Disk Manager utility (in the CD-
ROM), or the barcode reader.
Each mailbox may be used by an individual who desires to share
the printer in this mode. By default, each mailbox is numbered
from 'Tray 001,' 'Tray 002,' ... etc. To 'post' a job in one of these
mailboxes, you assign a numbered or named mailbox on the
printer driver when printing.
To retrieve the stored job for printing, see
Virtual Mailbox (VMB) on page
NOTE
The virtual mailbox can be used in PCL 6 emulation only.
Using Quick Copy
This mode enables you to print the requested number of copies
of a job, simultaneously storing the job on the hard disk. When
additional copies are required, you can reprint the required
number of copies from the printer operator panel. To print a job
as a quick copy job, see
Printer Driver
The default number of print jobs that can be stored on the hard
disk is 32. This value can be increased to up to 50 from the e-MPS
Configuration menu. For details, see
ration on page
3-16. When the number of jobs reaches the limit,
the oldest job will be overwritten by the new one.
When the printer is turned off, all stored jobs will be deleted.
Q Q Q Q Printing Additional Copies using Quick Copy
To print additional copies of a job stored in the printer:
1
Press the MENU key.
2
Press the 3 or 4 key repeatedly until e-MPS > ap-
pears.
e-MPS
3
Press the 2 key.
Printing a List of
3-34.
Retrieving Jobs from
3-15.
Guide.
Changing e-MPS Configu-
>
Chapter 3 Using the Operator Panel
4
Press the 3 or 4 key repeatedly until >Quick Copy
appears followed by the user name (Harold, in this
example). The user name is assigned at printing using
the printer driver.
>Quick Copy
Harold
5
Press the ENTER key. A blinking question mark (?) ap-
pears before the user name.
>Quick Copy
?Harold
6
Press the 3 or 4 key to display the desired user name,
Arlen, in this example.
>Quick Copy
?Arlen
7
Press the ENTER key. The job name entered in the
printer driver (Report, in this example) appear with a
blinking question mark (?) before the letters.
>Arlen
?Report
8
Press the 3 or 4 key to scroll to the desired job title.
9
Press the ENTER key. The number of copies to be print-
ed can be set. To increase the copy count, press the 3
key; to decrease the copy count, press the 4 key.
>Report
Copies
10
Press the ENTER key to finalize the copy count. The
printer prints the specified number of copies for the job.
Q Q Q Q Deleting a Quick Copy Job
All quick copy jobs are automatically deleted when the printer is
turned off. If you desire to explicitly delete a stored quick copy
job, proceed as follows:
1
Follow steps 1 through 8 in the above section to dis-
play the title of the job to be deleted.
2
When the title of the job to be deleted is displayed, e.g.
Report, below, press the ENTER key. The cursor below
the copy count starts to blink.
>Report
Copies
001
001
3-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-9500dnFs-9500dn

Table of Contents