Table of Contents
Advertisement
Glossary
Printer driver
The printer driver makes it possible for you to print data created
using application software. The printer driver for the printer is on
the Kyocera Mita Digital Library CD-ROM supplied with the print-
er. Install the printer driver on the computer connected to the
printer.
RAM disk
This is a virtual disk drive that uses part of the printer's memory.
With RAM disk you can set any memory size arbitrarily, and use
electronic sorting (to reduce print time).
Simple Network Management Protocol (SNMP)
This is a protocol for the management of networks that use TCP/
IP (Transmission Control Protocol/Internet Protocol).
Sleep mode
This mode is activated after a specified amount of time elapses.
The printer goes into economy mode and a minimum amount of
power is consumed. You can change the amount of time before
the printer goes into sleep mode from the printer's operator pan-
el. The default setting is 30 minutes.
Status page
This lists printer conditions, such as the printer's memory, the to-
tal number of copies printed, and paper source settings.
Glossary-2
Advertisement
Chapters
Table of Contents
