2. Installing Option Units
2.1 PF-70/75 Paper Feeders
PF-70 or PF-75 Paper Feeder can be installed below the printer.
PF-70 Paper Feeder holds approximately 500 sheets of A4 to A3
(11 × 17" in Ledger) size paper.
PF-75 Paper Feeder holds approximately 3000 sheets of A4, B5
or Letter size (8.5 × 11") paper.
For details of installing the optional paper feeder in the printer,
see the
PF-70/75 Installation
2.2 DF-70/71/75 Document Finishers
DF-70/71/75 Document Finisher can be installed to the printer.
DF-70/71
For details of installing the optional finisher in the printer, see the
DF-70/71/75 Installation
Guide.
PF-70
PF-75
Guide.
DF-75
2.3 Network Interface
The FS-9100DN/FS-9500DN have the standard Network inter-
face. This printer supports the TCP/IP, IPX/SPX, NetBEUI, and
EtherTalk protocols, so the network printing under various plat-
forms such as Windows, Macintosh, UNIX, and NetWare is
available.
An option network interface card can be added by the following
procedure.
1
Turn off the printer and disconnect the power cord and
printer cable.
2
Remove the two screws from the option interface slot
cover (OPT2).
3
Insert the network interface card and secure it with the
screws removed in step 2.
4
Connect the network cable.
5
Set the network address from the printer operator panel
(for details about the modes, see
terface Parameters on page
Appendix D Option Units
Changing Network In-
3-20).
D-3