Table of Contents
Advertisement
9-4. Removing Evaporator
(1) Remove screws holding top plate of evaporator.
(2) Remove screws holding evaporator. (Fig. 10)
(3) Grasp lower portion of the evaporator with both hands
and tilt it slightly and lift it carefully from the drain pan so
as not to distort the copper tube.
9-5. Removing Blower Wheel
(1) Remove the evaporator.
Refer to "9-4. Removing Evaporator"
(2) Loosen a nut holding blower wheel on motor shaft using
hex wrench. (Fig. 11)
(3) Remove the housing of blower wheel.
(4) Extract the blower wheel from the motor shaft.
(Fig. 10)
21
Fig. 10
Fig. 11
Advertisement
Table of Contents
