Steam; Noise; Steaming; Steam Baking - Steam-Assisted Cooking - Bosch CSG656B 2B Series Instruction Manual

Note: The "Cooking time" time-setting option starts at
the same time as rapid heating. Therefore, only set a
cooking time when rapid heating has come to an end.
Cancelling
To cancel the rapid heating, touch the "Rapid heating"
text field again. "Off" is displayed in the text field.

`Steam

F ood can be cooked particularly gently using steam.
S t e a m
With some heating modes, you can prepare food with
steam assistance. In addition, the Dough proving,
Defrost and Reheat heating modes are available.
:
Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.

Noise

Pump
You will hear a humming noise while the pump is in
operation and after switching it off. This noise is caused
by the pump function test. It is a normal operating
noise.
Control panel
You will hear a humming or clicking noise when
opening the control panel. These noises are caused by
the control panel being pushed out. They are normal
operating noises.

Steaming

During steaming, hot steam surrounds the food and
therefore prevents loss of nutrients from the food. The
shape, colour and typical aroma of the dishes are
retained as a result of this preparation method.
Note: If the water tank runs dry during steaming,
operation is interrupted. Fill the water tank.
Starting
Fill the water tank.
1.
Note: Only switch on steaming once the cooking
compartment has cooled down completely (to room
temperature).
Touch the Menu field.
2.
The list of operating modes is displayed.
Touch the "Steaming" text field.
3.
Touch the "Steaming" text field.
4.
The temperature is in focus.
Turn the rotary selector to set the temperature.
5.
Touch the "Duration" text field and set the duration.
6.
Note:
A duration is always required for the steam
types of heating.
Press the l Start/Stop button to start.
7.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating up. The duration
00 m 00 s is shown on the display.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Changing
You can change the settings as usual.
To change the temperature or the duration, touch the
corresponding text field and change using the rotary
selector. The change is adopted immediately.
To change the type of heating, interrupt the operation
beforehand using the l Start/Stop button.
Menu cooking
With steam, you can cook a whole menu at once,
without the different flavours mixing. ~ "Tested for you
in our cooking studio" on page 36
Steam baking – Steam-assisted cooking
When you cook with steam assistance, steam is
introduced into the cooking compartment at various
intervals and with varying degrees of intensity. This
gives you a better cooking result.
Your food
Becomes crispy on the outside
■
Develops a shiny surface
■
Is succulent and tender on the inside
■
Only undergoes a minimum reduction in volume
■
You set the type of heating and steam intensity
combination that you want. Use the information in the
tables to select a suitable type of heating and steam
intensity, or select a programme.
Steam intensity
Different intensity levels are available when adding
steam:
Intensity
Low
Medium
High
Suitable types of heating
You can switch on steam assistance for these types of
heating:
4D hot air <
■
Top/bottom heating %
■
Hot air grilling 7
■
Keeping warm O
■
Starting
Fill the water tank.
1.
Set the type of heating and temperature.
2.
Touch the "Added steam" text field.
3.
In the display, the steam level is displayed in white
and in focus.
Steam
Setting
01
02
03
en
17