Kurzweil K2500 Reference Manual page 7

Parameters:
PAGE 1
Wet/Dry 0 to 100%wet
Rvrb Time 0.5 to 30.0s, Inf
L Pre Dly 0 to 620ms
PAGE 2
Room Type Hall1
PAGE 3
Gate Thres -79.0 to 0.0 dB
Gate Duck In or Out
Wet/Dry
Out Gain
Gate Thres
Gate Duck
Gate Time
Gate Atk
Gate Rel
Signal Dly
For descriptions of the other parameters, see the previous section, FXAlgs #1-2.
Out Gain
HF Damping
R Pre Dly
Diff Scale
Size Scale
Density
Gate Time
Gate Atk
Gate Rel
GateSigDly
Reduction
-dB 60 40 * 16 * 8 4 0
A simple mix of the reverb sound with the dry sound. When set fully dry (0%), the gate
is still active.
An overall level control of the effectÕs output (applied after the gate).
The input signal level in dB required to open the gate (or close the gate if Gate Duck is
on).
When set to ÒOffÓ, the gate opens when the signal rises above threshold and closes when
the gate time expires. When set to ÒOnÓ, the gate closes when the signal rises above
threshold and opens when the gate time expires.
The time in seconds that the gate will stay fully on after the signal envelope rises above
threshold. The gate timer is started or restarted whenever the signal envelope rises
above threshold.
The attack time for the gate to ramp from closed to open (reverse if Gate Duck is on)
after the signal rises above threshold.
The release time for the gate to ramp from open to closed (reverse if Gate Duck is on)
after the gate timer has elapsed.
The delay in milliseconds (ms) of the reverb input signal relative to the side chain signal.
By delaying the reverb signal, the gate can be opened before the reverb signal rises
above the gating threshold.
FXAlg #3: Gated MiniVerb
Off, -79.0 to 24.0 dB
16 to 25088 Hz
0 to 620 ms
0.00 to 2.00x
0.00 to 4.00x
0.00 to 4.00x
0 to 3000 ms
0.0 to 228.0 ms
0 to 3000 ms
0.0 to 25.0 ms
Algorithm Reference-7