Kurzweil K2500 Reference Manual page 68

Combination Algorithms [Ò+Ó]
Combination Algorithms [Ò+Ó]
FXAlg #700 Ñ Chorus+Delay
FXAlg #701 Ñ Chorus+4Tap
FXAlg #703 Ñ Chor+Dly+Reverb
FXAlg #706 Ñ Flange+Delay
FXAlg #707 Ñ Flange+4Tap
FXAlg #709 Ñ Flan+Dly+Reverb
FXAlg #722 Ñ Pitcher+Chor+Dly
FXAlg #723 Ñ Pitcher+Flan+Dly
Signal Routing (2 effects)
The algorithms listed above with two effects can be arranged in series or parallel. The output of the first effect in the
algorithm nameÑAÑis wired to the input of the second effectÑBÑand the input into effect B is a mix of effect A
and the algorithm input dry signal. The effect B input mix is controlled by a parameter A/Dry>B. For example, in
Chorus+Delay, the parameter name is ÒCh/Dry>DlyÓ. The value functions much like a wet/dry mix where 0%
means that only the algorithm input dry signal is fed into effect B, thus putting the effects in parallel; and 100%
means only the output of effect A is fed into effect B, thus putting the effects in series.
L Input
Chorus
Both effect A and B outputs are mixed at the algorithm output to become the wet signal. These mix levels are
controlled with the two parameters that begin with ÒMixÓ. These allow only one or both effect outputs to be heard.
Negative mix amounts polarity-invert the signal, which can change the character of each effect when mixed
together or with the dry signal. The Wet/Dry parameter adjusts the balance between the sum of both effects
determined by the Mix parameters, and the input dry signal. Negative Wet/Dry values polarity-invert the summed
wet signal relative to dry.
Two-Effect Routing:
Wet/Dry -100 to 100%
Mix Effect -100 to 100%
Mix Effect -100 to 100%
Algorithm Reference-68
A family of combination effect algorithms
Allocation Units: 1 or 2
Ch/Dry->4T
Blend
An example of routing using Chorus+4Tap
Out Gain
A/Dry->B
Mix 4 Tap
4-Tap
Delay
Mix Chorus
Off; -79.0 to 24.0 dB
0 to 100%
Wet/Dry
Output
Blend
Out Gain