Table of Contents
Advertisement
mkalafa,
Flat tyre
318
Wheel bolts for all wheels supplied by the
:
factory
Clean the wheel and wheel hub contact
X
surfaces.
Place the emergency spare wheel onto the
X
centring pin and push it on.
Tighten the wheel bolts until they are fin-
X
ger-tight.
Unscrew the centring pin.
X
Tighten the last wheel bolt until it is finger-
X
tight.
Version: 2.11.8.1
Lowering the vehicle
Lower the vehicle. To do this, turn the crank
X
of the jack anti-clockwise until the vehicle
is standing firmly on the ground again.
Place the jack to one side.
X
Tighten the wheel bolts evenly in a cross-
X
wise pattern in the sequence indica-
ted (: to A). The tightening torque is
130 Nm.
G
Risk of accident
Have the tightening torque checked immedi-
ately after a wheel is changed. The wheels
could work loose if they are not tightened to
a torque of 130 Nm.
Turn the jack back to its initial position and
X
store it and the rest of the vehicle tool kit
in the boot/luggage compartment.
Vehicles with the "Minispare" emergency
spare wheel*:
Transport the faulty wheel in the boot/lug-
X
gage compartment.
i
When you are driving with the "Minispare"
emergency spare wheel* fitted, the tyre
pressure loss warning system or the tyre
pressure monitor* cannot function reliably.
MOExtended run-flat system*
The MOExtended run-flat system may only be
used in conjunction with the tyre pressure
* optional
Advertisement
Chapters
Table of Contents
