Mercedes-Benz E-CLASS 2009 Manual page 169

mkalafa,
Driving systems
166
could otherwise endanger yourself and oth-
ers.
The system may be impaired or may not func-
tion if:
there is poor visibility, e.g. due to snow,
R
rain, fog or spray.
the windscreen is dirty, misted up or cov-
R
ered, for instance by a sticker, in the vicinity
of the camera.
on bends, on uphill gradients or downhill
R
gradients.
Light from the headlamps of oncoming vehi-
cles does not affect the Night View Assist Plus
display in the multi-function display. This is
also the case if you cannot switch on the
main-beam headlamps because of oncoming
traffic.
G
Risk of accident
Night View Assist Plus does not detect
objects in the immediate vicinity of the vehi-
cle. Look through the windscreen when
manoeuvring. Make sure that there are no
people or animals in the area in which you are
manoeuvring.
i
Infrared light cannot be seen by the
human eye and therefore does not dazzle.
Night View Assist Plus can therefore
remain switched on even if there is oncom-
ing traffic.
Night View Assist Plus camera
:
Version: 2.11.8.1
Activating or deactivating Night View
Assist Plus
Activating
You can only activate Night View Assist Plus
if:
the key is in position 2 in the ignition lock.
R
it is dark.
R
the light switch is in the c or L posi-
R
tion.
reverse gear has not been engaged.
R
Make sure COMAND APS is switched on.
X
Press button :.
X
The Night View Assist Plus display appears
in the COMAND APS display.
Night View Assist Plus display
:
Pedestrian recognised
;
Framing
=
Symbol for active pedestrian recognition
?
You can read about how to adjust the bright-
ness of the COMAND APS display in the
COMAND APS operating instructions.