[sc_resetflags, 1, en_US]
Figure 2-8
TEST/RESET▶ Key
From the Relay Identifier screen, reset the LEDs and outputs by pressing the TEST/RESET▶ key.
Reset through Rear Communication Protocol
The resetting of LEDs and BOs is possible via the rear communication protocol like Modbus RTU and IEC
60870-5-103.
Reyrolle, 7SR45, Device Manual
C53000-G7040-C101-2, Edition 09.2020
Reset Flags
2.6 Reset LED, Trip Flag Indication, and Binary Outputs
Device Functionality
35