Updating Software - Epson STYLUS PHOTO 2000P Instruction Manual

3. Remove the paper from the sheet feeder and remove the paper
support.
4. Open the printer cover again. Secure the ink cartridge holder
to the printer with tape as shown below, then close the printer
cover.
5. Push in the output extension tray, and then raise the output
tray.
6. Attach the protective materials to both sides of the printer.
7. Repack the printer and power cord in the original box.
8. Keep the printer level during transport.

Updating Software

Follow the directions in this section if you have upgraded your
computer from Windows 95 to Windows 98 or if you are a
Windows NT 4.0 user and wish to update your printer driver from
a previous version.
8-12
Maintenance