Epson STYLUS PHOTO 2000P Instruction Manual page 39

Note:
Do not select Sheet Feeder or Sheet Feeder - No Margins as
the Paper Source setting in the printer driver. Doing so will cause
unnecessary paper to be fed after each print job. If you accidentally
select Sheet Feeder or Sheet Feeder - No Margins, cut the
paper off at the back of the printer before it feeds into the sheet feeder,
then turn the printer power off and on again.
4. Make the Roll Paper Option settings at the bottom of the
dialog box.
Banner Mode
Cut Sheet
Mode
Save roll
paper
Select this mode when you wish to print multi-
page data as continuous data on the roll paper,
rather than as individual pages. When this check
box is selected, the Save roll paper check box is
enabled.
Select this mode when you wish to print multi-
page data as individual pages, rather than as
continuous data. When this check box is
selected, the Print page frame check box is
enabled.
Select this check box when you do not wish any
paper to be fed after the data is printed. This
feature is only available when Banner Mode is
selected.
Paper Handling
1-21