SRAM G2 RE Service Manual page 15

8 Pierce each piston seal with a pick, and remove each piston seal from Pierce each piston seal with a pick, and remove each piston seal from
inside both caliper body halves. inside both caliper body halves.
Discard the piston seals. Discard the piston seals.
Do not scratch the seal gland with a pick. It could result in a slow
fluid leak when the brake is applied.
9
Spray isopropyl alcohol into each caliper body half, and clean each Spray isopropyl alcohol into each caliper body half, and clean each
piston bore. piston bore.
Allow any remaining isopropyl alcohol to dry before proceeding. Allow any remaining isopropyl alcohol to dry before proceeding.
NOTICE
Pick
Pick
15
Caliper Piston Removal