Omron ZEN Quick Manual page 40

9 Accessories
9.3. Connecting the ZEN Support Software
OMRON ELECTRONICS, S.A.
Menu Operation
Save Transfers the CPU program to the Memory
Cassette. Any program already in the cassette
will be overwritten.
Load Transfers the Memory Cassette program to
the CPU. Any program already in the CPU will
be overwritten.
Erase Clears the program from the Memory
Cassette.
Note.
1. Program transfer includes the ladder program, parameters and all data
settings. Normal and holding timers, counters and holding bits present
values cannot be transferred.
2. Only error-free programs can be transferred. The program will not be
transferred if it contains any type of error.
3. The memory cassette allows 100,000 writes.
The Software can be used either for ZEN programming or for monitoring. For
further information about the functions or operations, see the 'ZEN-SOFT01
ZEN Support Software Operation Manual' (W386).
Operating System
CPU
Memory
Hard disc
CD-ROM drive
Communications
Keyboard and
mouse
Monitor
ZEN Programmable Logic Module
Conditions
Windows 95, 98, ME, 2000,
NT 4.0 Service Pack 3
Pentium 133 MHz or higher
64 Mbytes min.
40 Mbytes free disc space min.
Required
Serial port
Required
800x600 dots (SVGA) min. 256
colors min.
Page 40