Omron ZEN Quick Manual page 26

7 Programming Functions
7.3.1. Settings in the Ladder Program
7.3.2. Settings in the Parameter Settings Screen
Day
Time
Monitoring
enabled/disabled
OMRON ELECTRONICS, S.A.
Weekly timer inputs are written in the ladder program edit screen. Settings are
carried out in the parameter settings screen.
No. of weekly timers
Note. When the flashing cursor is on the start day, press the left key followed
by the Up/Down keys to set the stop day. If the start day is not correctly set,
the timer will operate only according to the time set.
Start day Sun/Mon/Tues/Wed/Thurs/Fri/Sat
Stop day Sun/Mon/Tues/Wed/Thurs/Fri/Sat/None
Start time 00:00 to 23:59
Stop time 00:00 to 23:59
A The parameters can be modified and monitored
D The parameters cannot be modified or monitored
ZEN Programmable Logic Module
Weekly timer address
Output to activate
@0 to @7
No. of weekly timer
Start day
Stop day
Monitoring enabled/disabled
Stop time
Start time
Page 26