Omron ZEN Quick Manual page 28

7 Programming Functions
7.4.1. Settings in the Ladder Program
7.4.2. Settings in the Parameter Settings Screen
Setup and operation
Start and stop date When the start date is
before the stop date
When the start date is
after the stop date
When the start and stop
dates are the same
OMRON ELECTRONICS, S.A.
Calendar timer inputs are written in the 'Edit Screen'. Settings are carried out
in the parameter settings screen.
Calendar timer address
No. of Calendar Timer
Calendar timer address
Start date
Stop date
(see note)
Monitoring
enabled/disabled
Example
ON:04/01
OFF: 09/01
ON: 12/26
OFF: 01/07
ON: 07/26
OFF: 07/26
Note.
To stop operation on 31 August, the following day's date (1 September) should
be set as the stop date.
ZEN Programmable Logic Module
Output corresponding to Timer
*0 to *7
Monitoring
enabled/disabled
Start date
Stop date
Jan 1 to Dec 31
Jan 1 to Dec 31
A The parameters can be
modified and monitored
D The parameters cannot be
modified or monitored
Operation
Operates between 1 April and 31 August
(see note)
Operates between 26 December and 6 January
of the following year
Operates regardless of the set date
Page 28