Table of Contents
Advertisement
www.seagate.com
3.4
Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-
mounting holes. Refer to
Figure 2
mounting the drive:
• Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
Figure 2 Mounting dimensions (1 and 2-disk models)
Max: .795" or 20.20 mm
Alterntive: .783" .012" or 19.90 0.30 mm
Seagate SkyHawk Product Manual, Rev. C
for drive mounting dimensions. Follow these important mounting precautions when
Configuring and Mounting the Drive
23
- Quick Links:
- Drive Specifications
Hide quick links:
Advertisement
Table of Contents
