Konica Minolta PageScope User Manual page 13

3 Printer Agent Configuration
Select "Printer Agent List" from the column at the right, and then click
2.
the [New] button to create the printer agent.
The Create Printer Agent dialog appears. (This dialog is the same as
that displayed when creating a controlled access printer, as described
below.)
Enter the printer agent name (e.g., Minolta_PA1) in the "Printer Agent
3.
(PA) Name" box.
4. From the list, according to the syntax
"NDPS_Manager_Name.Context_Name", select the NDPS manager
started up from the server console.
Select "Minolta PageScope NDPS Gateway (IP)" in the "Gateway
5.
Types" box, and then click the [OK] button.
To configure the printer agent, continue with the instructions in section
3.2.
8