Table of Contents
Advertisement
3. Set all other parameters as required.
Please note the specifications in the next paragraph.
4. Download the configuration to the controller.
Configuring the optical handheld readers
To allow operation of the optical handheld readers via the RS-232 interface with the RF170C
RS-422/RS-232 you need to configure the handheld readers appropriately. This configuration
can be achieved quickly and simply by scanning the relevant codes.
• SIMATIC MV320 (≤ AS 2)
• SIMATIC MV320 (≥ AS 3)
Scanning the code will set all relevant parameters for the communication between the
RF170C RS-422/RS-232 communications module and the optical handheld reader:
• Interface: RS-232
• Transmission speed: 115.2 kBd
SIMATIC RF170C
Operating Instructions, 02/2022, J31069-D0176-U001-A6-7618
A.2 Operation of optical handheld readers, access control readers or serial devices
Appendix
61
Advertisement
Table of Contents
