Base Settings; Flash Time; Setting The Dial Mode; Modify Pin - ClearSounds V508 User Manual

Press the DOWN KEY to scroll through the menu and select
PHONEBOOK then press the SOFT KEY to make your selection
press the DoWN KEY to scroll through the menu and select DELETE
then press the SoFT KEY to make your selection
press the DoWN KEY to scroll through and select the name you want
to delete is displayed, then press the SoFT KEY. The display will show
"CoNFIRM?". You can press the SoFT KEY to Delete the number or
press SoFT KEY to choose CANCEL.
NOTE: The memory default names are M1-M4 and SOS, you can add a
name or something behind them but you cannot delete the default name.

BASE SETTINGS

Flash Time

You can change the FLASH time by using the following steps:
press the SoFT KEY under MENU while in standby mode
Using the Up or DoWN KEY scroll through the menu and select BS
Settings, press the SoFT KEY to SELECT
Using the DoWN KEY scroll through the menu and select FLASH
TIME, press the SoFT KEY to SELECT
The display shows the current setting. Using the DoWN KEY scroll
through to select Flash-1 (600ms) or Flash-2 (300ms), using the
SoFT KEY select SAVE.

Setting the Dial Mode

Press the SOFT KEY under Menu in the LCD Screen.
Press the Up or DoWN KEY to scroll through the menu and select BS
Settings by pressing the SOFT KEY
Press the DOWN KEY again to scroll to DIAL MODE then press the
SOFT KEY to make your selection.
Press the DOWN KEY again to select TONE or PULSE press the
SOFT KEY to select SAVE
NOTE: If you are not sure which dialing mode to select contact your
local phone service provider.

Modify PIN

You can change the pIN Number of the base. The default pin is
0000.
press the SoFT KEY under MENU while in standby mode
25 – ENGLISH