Turn The Camera On - Panasonic KX-HCM110A Service Manual

- The camera will be connected to your router using a "straight" Cat5
network cable (customer-provided).
1. Connect the Ethernet cable (customer-provided) to the camera.
Note:
These instructions assume your PC is already connected to the Internet and your network includes a
router.
2. Connect the Ethernet cable to your router.
7.3. TURN THE CAMERA ON
Inserting the AC plug of the AC cord to the outlet powers up the camera.
1. Connect the power cord of the AC adaptor to the DC In jack, and plug
the AC cord into the outlet.
- The AC cord is used as the main disconnect device, ensure that
the socket-outlet is located/installed near the equipment and is
easily accessible.
- Use only specified Panasonic AC adaptor PQLV202 (Order No.
PQLV202Y).
16