Envelopes - Konica Minolta Magicolor 2430 DL User Manual

Envelopes

Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Capacity
Orientation Face up
Driver
Media Type
Weight
Duplexing
43 lb bond is also referred to as 90 lb index stock.
Use envelopes that are
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
Approved for laser printing
Dry
DO NOT use envelopes that have
Sticky flaps
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
Transparent windows
Too rough of a surface
Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
Been presealed
Media Types
Tray 1
Tray 2
Envelope
91 to 163 g/m² (25 to 43 lb bond)
Not supported
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Up to 10 envelopes, depending on their
thickness
Not supported
43