Envelopes - Konica Minolta magicolor 5450 User Manual

Driver
Media Type
Weight
Duplexing
DO NOT use thick stock that is
#
Mixed with any other media in Tray 1 (as this will cause printer misfeed-
ing)

Envelopes

Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Capacity
Orientation Face down
Driver
Media Type
Weight
Duplexing
Use envelopes that are
#
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
! "
#
Approved for laser printing
#
Dry
DO NOT use envelopes that have
#
Sticky flaps
#
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
#
Transparent windows
#
Too rough of a surface
Media Types
Thick 1 (91-150 g/m
Thick 2 (151-210 g/m
91–210 g/m² (25–55.9 lb bond)
Not supported
Tray 1
(Manual Feed
Tray)
Tray 2/3/4
Envelope
91–163 g/m² (25–43 lb bond)
Not supported
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
2
)
2
)
Up to 10 envelopes, depending on their
thickness
Not supported
69