Installing A Dimm - Konica Minolta Magicolor 2430 DL User Manual

Installing a DIMM

Note
It's very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on Page 116. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
If the duplex option is
installed, remove it.
2
Using a screwdriver, remove the
screw on the back of the printer.
118 Dual In-Line Memory Module (DIMM)