Table of Contents
Advertisement
11.3
AcquisitionControl
Name
AcquisitionMode
AcquisitionStart
AcquisitionStop
AcquisitionFrameCount
AcquisitionFrameRate
TriggerSelector
TriggerMode [TriggerSelector]
TriggerSoftware [TriggerSelector]
TriggerSource [TriggerSelector]
TriggerActivation [TriggerSelector]
TriggerDelay [TriggerSelector]
ExposureMode
ExposureTimeSelector
ExposureTime
[ExposureTimeSelector]
ExposureAuto
ExposureAutoLimitMin
ExposureAutoLimitMax
STC-MBS2041POE / STC-MCS2041POE
Product Specifications and User's Guide
Description
Sets the acquisition mode of the device.
Starts the Acquisition of the device.
Stops the Acquisition of the device at the end of the current Frame.
Number of frames to acquire in Multi Frame Acquisition mode.
Controls the acquisition rate (in Hertz) at which the frames are
captured.
Selects the type of trigger to configure.
Controls if the selected trigger is active.
Generates an internal trigger.
Specifies the internal signal or physical input Line to use as the trigger
source.
Specifies the activation mode of the trigger.
Specifies the delay in microseconds (us) to apply after the trigger
reception before activating it.
Sets the operation mode of the Exposure.
Selects which exposure time is controlled by the Exposure Time
feature.
Sets the Exposure time when Exposure Mode is Timed and Exposure
Auto is Off.
Sets the automatic exposure mode when Exposure Mode is Timed.
Determine the lower limit of exposure time when Exposure Auto is set
to Continuous.
Determine the upper limit of exposure time when Exposure Auto is set
to Continuous.
No.18S065-03
60/71
Advertisement
Table of Contents
