Table of Contents
Advertisement
T
roubleshooting
Red Sensor Light is On
Possible causes
1.
Vacuum Bag is full
2.
Possible obstruction in hose or power head
Machine shuts off and red light stays on
Possible causes
1.
Brush is blocked
Low Suction
Possible causes
1.
Dust Bag is Full
2.
Wand is not installed properly
Poor Pick Up
Possible causes
1.
Brush not adjusted to the proper height
2.
Brush is worn out
Vacuum motor is not working
Possible causes
1.
Electrical outlet not working
2.
Air path obstructed
Brush Motor is not working
Possible causes
1.
Brush Motor is not working
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-855-544-7336.
w w w . b i s s e l l c o m m e r c i a l . c o m
WARNING:
to reduce the risk of fire, electric
shock, or injury,turn power
off and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
Remedies
1. Replace Vacuum Bag with a new one
2. Check hose and brush roll for obstruction and clear the area
Remedies
1. Turn off unit and clear the brush area of any large debri
Remedies
1. Replace Dust Bag
2 Secure the wand properly to ensure no air leaks
Remedies
1. Adjust the height adjustment to confirm you're at the right
carpet height
2 Replace the brush
Remedies
1 Check to make sure vacuum is plugged in properly
2. Check electrical source
3. Check to make sure the vacuum button is ON
4. Check for any air flow obstructions
5 Switches might need to be replaced
Remedies
1. Check to make sure vacuum is plugged in properly
8 5 5 . 5 4 4 . 7 3 3 6
9
Advertisement
Table of Contents
