Bissell BigGreen Commercial 15K7 User Manual page 6

O
perations
Operating instructions
1. make sure unit is un-plugged and check to
see if there is bag in the unit, by opening the
front door latch. if there is no bag attached
please secure one (see maintenance and
care section), then close front door.
2. Plug cord into an electrical outlet.
3. adjust the carpet height by turning round
knob near the foot of the vacuum to the car-
pet height that best suits the carpet area you
are going to clean
4. turn machine to "on" position.
5. to detent the handle, push on yellow
release pedal. When the handle is in
the detent position the brush motor will
start rotating.
6. you can now begin to vacuum.
6
w w w . b i s s e l l c o m m e r c i a l . c o m 8 5 5 . 5 4 4 . 7 3 3 6