Basic Linked Shooting - Canon WFT-E8A Instruction Manual

Basic Linked Shooting

Link the master camera to slave cameras for basic linked shooting.
When the Live View shooting/Movie shooting switch is set to

<k>, linked shooting is not possible. Set it to <A>.
Preparing Slave Cameras
First, set up slave cameras by operating the cameras to use as slaves.
When using multiple slave cameras, operate all slave cameras in the
same way.
84
Select [Communication settings].
1
Under the [53] tab, select

[Communication settings], then
press <0>.
Select [Network settings].
2
Set [Communication func] to

[Enable], then select [Network
settings].
Select [Connection settings].
3
Select [LinkedShot].
4
Turn the <5> dial to select

[LinkedShot] at the bottom.