Canon WFT-E8A Instruction Manual page 116

Function Settings Screen
[Power saving]
FTP Trans.

When [Enable] is set, if no image is transferred for a certain period
of time, the transmitter will log off from the FTP server and stop the
LAN. When the transmitter is ready for image transfer, the
connection is re-established automatically.
EOSUtility/WFTserver/Smartphone

If no communication is established for a certain period of time, the
transmission rate drops to save power. Note that the camera
responds as follows regardless of the [Power saving] setting.
• When a connection is established with [Easy connection], the
power saving function is disabled.
• When a connection is established using an access point, the
power saving function is enabled.
LinkedShot

The power saving function is disabled regardless of the setting.
[MAC address]
The MAC address of the transmitter can be checked. The MAC address
of the transmitter is displayed in [Wireless].
116