Samsung SPD-3750 User Manual page 25

Functional Description
8. Others
▶ Main Menu/Camera Setting/Others
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
Camera Setting
① Focus & Zoom
 White Balance ATW
③ Exposure
④ Back Light
OFF
 AGC
Medium
 SSNR
Medium
⑦ Day & Night
⑧ Others
➡
Others
 Sync INTERNAL
 Stabilizer OFF
③ Image Adj
 Freeze
OFF
 Dome Cover
Inner
SPEED DOME CAMERA
More user manuals on
ManualsBase.com
Sync : Enables selecting Internal Synchronization or the
external Line Lock. (SPD-3750T not supported)
- Internal : Synchronizes the camera's output timing to the
internal crystal.
- Line Lock : Synchronizes the camera's output timing to
the AC adapter power to synchronize multiple
cameras. This option is useful when using a
switch such as Matrix Switcher.
- Line Lock Phase : Enables setting the adapter's
synchronization phase between 0 and
360°.
Stabilizer : The Stabilizer compensates for any small
movements of the camera caused by due to
the wind and other reasonsor other causes.
Notes
 •  T heStabilizerusesthedigitalzoomandmaycause
low picture quality.
 •  T heStabilizerisdisablediftheambientlightistoo
low.
 •  T heStabilizerisdisabledifthefieldofviewhasvery
low or no contrast, e.g. The sky or a white wall.
Image Adj :
- Sharpness : Sharpens outlines of an image.
- Color : Adjusts the color density of an image.
Freeze : Stops or reanimates an image.
Dome Cover :
These settings are to optimize the camera's focused object
position according to the dome cover type.
- Inner : Default dome cover type including the indoor flush
model. (Factory Release Mode)
- Outer : Dome cover type for outdoor housings except the
indoor flush model.
- None : When using the camera without a dome cover.
48
User's Manual
Functional Description
Sequence Setting
9. Power On Resume and MD Dwell Time
▶ Main Menu/Sequence Setting
Power On Resume :
Main Menu
This is useful when the power is disconnected and
① Camera Setting
reconnected due to power failures or other power
② Sequence Setting
interruptions.
③ P/T Setting
If the camera was performing a sequence action prior to a
④ OSD Setting
power disconnection, the camera automatically resumes
⑤ Alarm Setting
the action when the power is reconnected.
⑥ Initialize
MD Dwell Time :
 Status
When Motion Detection under the Preset Edit menu is
➡
selected, MD Dwell Time performs the Tour or Group
function.
Sequence Setting
While the camera is performing a sequence action, if
① Preset
motion is detected from a selected preset location, the
② Swing SEQ
camera pauses the sequence action operation and starts
③ Group SEQ
monitoring the location instead for a duration that is set
④ Tour SEQ
under the MD Dwell Time menu.
⑤ PTZ Trace
If the motion is no longer detectable or the duration
⑥ Auto Run
expires, the camera aborts the monitoring operation and
 Power On Resume ON
then resumes the sequence action.
 MD Dwell Time
ON
SPEED DOME CAMERA
49
User's Manual