Manual Installation - Minolta Dimage Dimage X Instruction Manual

D -
ATA TRANSFER MODE

Manual installation

To install the Windows 98 driver manually, follow the instructions in the connecting-the-camera-to-a-
computer section on page 65.
When the camera is plugged into the computer,
the operating system will detect the new device
and the add-new-hardware-wizard window will
open. Place the DiMAGE software CD-ROM in
the CD-ROM drive. Click "Next."
Choose to specify the location of the driver. The
browse window can be used to indicate the
driver location. When the location is shown in
the window, click "Next."
• The driver should be located in the CD-ROM
drive at :\Win98\USB.
68
Choose the recommended search for a suitable
driver. Click "Next."