Manual Installation - Minolta DiMAGE S414 Instruction Manual

Manual Installation

To install the Windows 98 driver manually, follow the instructions in the connecting-the-
camera-to-a-computer section on page 93.
When the camera is plugged into the
computer, the operating system will detect
the new device and the add-new-hardware-
wizard window will open. Place the DiMAGE
software CD-ROM in the CD-ROM drive.
Click "Next."
Choose to specify the location of the
driver. The browse window can be used to
indicate the driver location. The driver
should be located in the CD-ROM drive at
:\Win98\USB. When the location is shown
in the window, click "Next."
96 D -
ATA TRANSFER MODE
Choose the recommended search for a
suitable driver. Click "Next."
The last window will confirm the driver has
been installed. Click "Finish" to close the
add new hardware wizard. Restart the
computer.
The add new hardware wizard will confirm
the location of the driver. Click "Next" to
install the driver in the system.
One of three drivers may be located:
MNLVENUM.inf, USBPDR.inf,
USBSTRG.inf. The letter designating the
CD-ROM drive will vary between
computers.
When the my-computer window is opened,
a new removable-disk icon will be
displayed. Double click on the icon to
access the camera's CompactFlash card;
see page 98.
or
97