Packing List - Snapper XD ESXD20S82K User Manual

EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
Use of a product that may have been im-
properly assembled could result in seri-
ous personal injury.
■ Inspect the product carefully to make
sure no breakage or damage occurred
during shipping.
■ Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the product.
■ If any parts are damaged or missing,
please call your Snapper service centre
for assistance.

PACKING LIST

■ Owner's Manual
■ Snow thrower
■ Upper handle
■ Middle handle
■ Chute control rod
■ Grip handle
■ Chute deflector
English (original instructions)
If any parts are damaged or missing, do
not operate this product until the parts
are replaced. Failure to heed this warn-
ing could result in serious personal injury.
Before assembly, remove the battery
from the tool. Do not insert the battery
until assembly is complete. Failure to
comply could result in accidental starting
and possible serious personal injury.
Do not attempt to modify this product or
create accessories not recommended for
use with this product. Any such alteration
or modification is misuse, and could re-
sult in a hazardous condition leading to
possible serious personal injury.
INSTALL THE MIDDLE HANDLE
(See Figure 2)
■ Align the holes in the middle handle (4)
and the lower handle (15).
■ Put the U-bolts (32) through the holes.
■ Tighten the handle knobs (13) onto the
bolts.
■ Do the same operation on the other
side.
12
WARNING
WARNING
WARNING