Kodak PPM200 User Manual page 17

To install the KODAK PPM200 printer software:
1
Connect the USB cable to the computer and the printer.
2
Place the
computer's CD-ROM drive.
The KODAK PPM200 Installer
3
Click Install
The KODAK License Agreement
4
Click Accept.
The KODAK PPM200 Installer
5
Click Install.
The KODAK PPM200 Printer Selection
6
Follow the on-screen instructions.
Note: Prior to installing the
choose other options such as Learn, Registering online or
Browse (KODAK Web Site, Technical Support or Personal
Picture Maker Supplies).
Congratulations!
You have successfully set up your printer on a Macintosh computer.
Note for Macintosh Users:
If your Macintosh computer locks up or freezes while printing, you may
need to unplug the printer and turn off your computer. After a few seconds,
plug the printer back in and turn your computer back on. The printer
driver's spooler may attempt to start printing the job that was in the queue
before the computer locked up. This could cause your system to lock up
again. To recover from this problem:
1
Unplug the printer and turn off your computer.
2
Hold down the Shift key and turn on the computer.
KODAK PPM200 Printer Software CD
and Agree.
11
main screen appears.
screen appears.
screen appears.
screen appears.
KODAK PPM200
into your
software, you can