Cleaning The Flatbed Glass And Document Cover Detector - Kodak Truper 3210 Operator's Manual

Cleaning the Flatbed Glass and Document Cover Detector

Preparation: Locate the blower accessory and remove the brush from the blower. Open a package of the
roller cleaning paper, as described in
Blower accessory
Press the power switch to the OFF position.
1
Raise the feeder tray in the direction of the arrow until the tray clicks into place.
2
Open the document cover in the direction of the arrow.
3
Feeder tray
www.kodak.com/go/docimaging
"Roller Cleaning Paper" on page
Blower
Dotted line
Sensor or detector
78.
Roller cleaning paper
Document cover
90 of 144