Kodak Truper 3210 Operator's Manual page 51

Glued or curled documents may cause a paper jam or damage the ADF unit. Scan this type of document
using the flatbed.
The height of the documents placed in the feeder tray must not exceed the paper limit mark that
appears on the right side of the document guide.
The following chart indicates the maximum number of sheets that can be loaded on the feeder tray:
Paper weight (pounds)
Paper weight (grams/meter
Maximum number of sheets
Sheets that are exceptionally thick or thin should be placed in the ADF manually, one sheet at a time, or
they should be scanned using the flatbed.
Curled, wrinkled, or folded documents may not scan properly. Check the allowances for curl and fold
in the following diagram:
Curl must be
less than 0.20
inches (5 mm)
www.kodak.com/go/docimaging
(See the diagram on page
11 14
2 40 52
)
320 260
Feeding direction
Fold must be
less than 0.20
inches (5 mm)
56.)
17 20 21
64 75 80
200 170 160
24 28 34
90 104 127
140 120 100
Feeding direction
51 of 144