Advertisement
DP2000 Digital Projector
Using the Remote Control
For best results, point the remote directly at the projector.
Standby – turns off the image
without turning off the projector
Computer – selects the
computer as the source
Using the Keypad
While the menu is displayed, the volume, source, and standby buttons act as navigation
buttons. Use them to select menu items and move to different menus.
Turning Off the Projector
To completely turn off the projector, unplug it.
If you want to turn off the display for a short period of time, press the
keypad or remote.
Safety Instructions
Safety Definitions
• Warning: Statements identify conditions or practices that could result in
permanent personal injury.
• Caution: Statements identify conditions or practices that could result in
damage to your equipment.
Safety Symbols
Attention: For information about use of a
feature, please refer to the Reference Manual.
Warning: Hot surface. Do not touch.
An arrow pointing to the lamp door on the projector.
EASTMAN KODAK COMPANY
Rochester, NY 14650
Kodak is a trademark of Eastman Kodak Company.
Disk Mouse – use to select
menus and menu items
Simulates the right mouse button –
use to adjust settings
Menu – displays the menu
Video – selects the video player
as the active source
The Keypad
Source button –
toggles back and
button on the
forth between
video and
computer sources
Volume – decreases
volume
Safety Terms:
• Warning: Don't look directly into the lens when the projector is turned on.
• Warning: Don't block ventilation openings.
• Warning: To replace the lamp, turn the display off and unplug the power cord.
To avoid burns, wait 30 minutes before opening the lamp door.
• Warning: Please use the power cord provided. Connect the power cord to a
receptacle with a protective safety (earth) ground terminal.
• Warning: Refer all service to qualified service personnel. Servicing your own
projector will void the warranty.
• Caution: Don't set liquids on the projector. Spilled liquids may damage your
projector.
• Caution: Don't place the projector on a hot surface or in direct sunlight.
• Caution: Do not drop the projector. Transport the projector in a Kodak-approved
case.
© Eastman Kodak Company, 1999
Simulates the left
mouse button – use to
adjust settings
Lamp on/off
Lamp LED
009-0469-00
Printed in the U.S.A.
8/99
Menu button – displays a menu
of projector options on the screen
Volume – increases volume
Standby – turns off the image
without turning off the projector
Advertisement
