Remote Control Overview - Kodak LUMA 450 User Manual

6. REMOTE CONTROL OVERVIEW

You will need to pair the remote control with the projector before using it. Follow these instructions to
pair the 2.4G wireless remote with your projector.
1. Within two (2) minutes of turning on the projector, press and hold both the Vol + and Vol – keys for
approximately three (3) seconds.
2. The indicator light in the remote will flash quickly during this time and then stop. When the
flashing stops, this indicates that the remote has successfully paired with the projector.
NOTE: While the mouse button is activated, the Volume + or Volume - keys will function as page up
and down.
5