Adjusting The Image Position Using Image Shift - Epson CO-FH02 User Manual

Adjusting the Image Position Using Image Shift

You can use the Image Shift feature to adjust the image position without moving the projector.
Note: This feature is not available if the digital zoom is set to the widest setting.
1. Turn on the projector and display an image.
2. Press the
3. Select Settings > Installation > Image Shift to display the Image Shift screen.
4. Use the arrow buttons on the remote control to adjust the image position.
Note: You can shift the image diagonally by pressing any pair of adjacent arrow buttons on the
remote control.
5. Press
Note: The Image Shift setting is retained even if the projector is turned off; however, you need to
readjust the image position if you change the projector's location or angle.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
menu button.
return to close the Image Shift screen.
Using Basic Projector Features
43