Restriction Of Use - Epson CO-FH02 User Manual

Hide thumbs Also See for CO-FH02:
Table of Contents

Advertisement

• Always lower the volume before turning off the projector. Turning on the projector with the volume too
high can damage your ears. Gradually increase the volume after turning on the projector.
• A mercury lamp with high internal pressure is used as the projector's light source. If the lamp is
subjected to vibrations or shocks, or if it is used for an overly extended length of time, the lamp may
break or it may not turn on. If the lamp explodes, gases may escape and small fragments of glass may
be scattered which could cause an injury. Be sure to observe the instructions below.
• Do not bring your face close to the projector while it is in use.
• Do not swing or tilt the projector. Shards of glass may fall out and could cause an injury. Be very
careful not to allow such pieces of glass to enter your eyes or mouth.
Note:
The lamp(s) in this product contain mercury. Please consult your state and local regulations
regarding disposal or recycling. Do not put in the trash.

Restriction of Use

Parent topic:
Restriction of Use
When this product is used for applications requiring high reliability/safety such as transportation devices
related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or
functional/precision devices, you should use this product only after giving consideration to including fail-
safes and redundancies into your design to maintain safety and total system reliability.
Because this product was not intended for use in applications requiring extremely high reliability/safety
such as aerospace equipment, main communication equipment, nuclear power control equipment, or
medical equipment related to direct medical care, please make your own judgment on this product's
suitability after a full evaluation.
Parent topic:
Notices
Important Safety Instructions
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents