Advertisement
Adjusting Image Position
Using Lens Shift
1. Turn the vertical and horizontal lens
shift dials on the projector to adjust
the position of the projected image.
2. If the projector is on a table, you can
level the image by turning any of the
projector's adjustable feet.
Note: See the online User's Guide for
instructions on adjusting the image position
using the projector menus.
Focusing and Zooming
Turn the focus ring to sharpen the
image.
Turn the zoom ring to reduce/enlarge
the image.
Note: See the online User's Guide for
instructions on adjusting the image using the
projector menus.
Correcting Image Shape
If your image is uneven on the sides or
you are projecting on a corner, you can
use the projector's distortion correction
features to adjust the shape. See the
online User's Guide.
Making Other Image
Adjustments
For help on using the projector's
features to improve the image quality,
see the online User's Guide.
Turning the Projector Off
Press the
power button on the
projector or remote control. If you see a
confirmation message, press the
power button again.
Note: If the Direct Power On function is
enabled, you can flip the switch controlling
the outlet to which the projector is connected
instead. To turn on this feature, see the
online User's Guide.
With Epson's Instant Off
you don't have to wait for the projector
to cool down; just turn it off or unplug it
when you're done.
Troubleshooting
If you see a blank screen or the
message No signal
Make sure the status light on the
•
projector is blue and not flashing.
Make sure the cables are connected
•
correctly. See the online User's
Guide.
You may need to change the image
•
source. See "Switching Between
Image Sources." Also, make sure the
source device is turned on.
technology,
®
Advertisement
