Setting Jumpers; Jumper Settings - ECS P6VPA2T Manual

Jumper Settings

Jumper Type Description
JP1 3-pin BIOS flash
protection
jumper
JP2 3-pin Clear CMOS
jumper
JP3 3-pin CPU core
JP4 voltage select
JP5 jumper
JP6
JP7
JP1: BIOS Flash Protect Jumper
This jumper is used to protect the BIOS from being uninten-
tionally flashed. Enable this jumper for protection and disable
this jumper when you want to flash the BIOS.
JP2: Clear CMOS Jumper
This jumper enables you to reset the BIOS. Follow these
instructions to reset the BIOS:
1. Turn the system off.
2. Short pins 2 and 3 on JP2.
3. Return the jumper to the normal setting.
4. Turn the system on. The BIOS is returned to the de-
fault settings.
A p p
A p p

Setting Jumpers

Setting (default)
1-2: Disable
1
2-3: Enable
1-2: Normal
2-3: Clear CMOS
JP3 JP4JP5 JP6 JP7
1
e n d i x A
e n d i x A
JP1
JP2
1