Removing The Keyboard - Dell Studio 1535 Service Manual

Hide thumbs Also See for Studio 1535:
Table of Contents

Advertisement

Back to Contents Page
  Keyboard
Dell™ Studio 1535/1536 Service Manual
 
CAUTION:
NOTICE:
as a connector on the back of the computer).
NOTICE:
computer.
 

Removing the Keyboard

 
1. Follow the procedures in
 
2. Remove the center control cover (see
 
3. Remove the keyboard surround by easing it out using a plastic scribe.
1
plastic scribe
3
keyboard surround
 
4. Remove the two screws at the top of the keyboard.
NOTICE:
keyboard.
 
5. Lift the keyboard and hold it to access the keyboard connector.
 
6. Disconnect the keyboard cable from the keyboard connector on the system board by rotating the keyboard connector latch towards the front of the
computer.
 
7. Slide the keyboard cable out of the keyboard connector.
NOTE:
Great user manuals database on
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
Before You
Begin.
Removing the Center Control
2
 
The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
If you have the backlit keyboard (optional), there would be an additional cable that needs to be disconnected.
UserManuals.info
Cover).
keyboard
 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio 1536

Table of Contents