Technical Description - ESAB PT 27 Instruction Manual

TECHNICAL DESCRIPTION

TECHNICAL DESCRIPTION
WARNING!
Plasma cutting involves very high voltages. Any contact with live parts in the
machine and on the torch must be avoided. Even the wrongful use of different
gases can be of risk. Before cutting commences with the PT 27 please read the
safety regulations in the LPG 50/80 manual.
Using the PT 27 with another power source without safety circuits entails serious
electrical risk.
Delivery specification
The consumables set includes the most usual parts recommended for quick repair of
the PT 27 to avoid unnecessary down time.
Order number 558 000- - 488 (50A)
Order number 558 000- - 489 (80A)
Cutting nozzle 50 A
Cutting nozzle 80 A
Electrode
Gas diffuser
Heat shield (blue)
Cutting support
Fuse 250V/15A
Valve pin
The cable set includes power cables, two override wires and a blue and a black-
wire which must be inspected at regular intervals. If the cable set's protective
cover is damaged and there is any air leakage then any damaged cables and
air lines must be replaced.
Carefully document the position of the cable set's parts and its connections before
disassembly to ease subsequent assembly.
bg01d12e
558 000--363
558 000--457
558 000--364
558 000--365
558 000--486
558 000--367
558 000--465
558 000–479
NB
- - 34 - -
50A 80A
4
4
3 3
1 1
2 2
1 1
4 4
4 4