Mitsubishi 4DQ3 Service Manual page 51

Where to apply
Mating face or parts
Crankcase
Oil pan gasket
Front/rear
attaching faces
Main oil gallery plug Crankcase
Crankcase screw
Crankcase
plug
Front plate
Front plate gasket
Crankcase
Gear case
Timing gear case
gasket
Front plate
Plate
Water pump gasket
Water pump
Plate
Pump plate gasket
Crankcase
Oil filler attaching
Oil filler/ crankcase
bolts
Water bypass hose Thermostat cover/
fitting water pump
Gear case mounting
Crankcase/ gear case
bolts
SEALANT APPLICATION DATA
Sealant
Three Bond 1102
Atmojet
ThreeBond l 207C
Hermeseal H-1
Hermeseal H-1
ThreeBond 1102
Three Bond 1102
ThreeBond 1102
Three Bond 1102
Three Bond 1102
Hermeseal H-1
Hermeseal H-1
Remarks
Apply to bottom face for oil
pan.
Apply to both sides of cork
packing.
Apply to periphery of rubber
packing.
Apply to hole in crankcase
and also to plug after
installing.
Apply to threaded portion.
Apply when reassembling
temporarily.
Apply to the whole surfaces
at reassembling.
Apply when reassembling
temporarily.
Apply to the whole surfaces
at reassembling.
Apply when reassembling
temporarily.
Apply to the whole surfaces
at reassembling.
Apply when reassembling
temporarily.
Apply to the periphery of
port.
Apply to threaded portion in
assembly.
Apply to threaded portion.
Apply to threaded portion of
one upper bolt and two lower
bolts.