Advertisement
Quick Links
How To Install a Server into a Tank
G292
Installing Server
CAUTION!
Make sure the crane can handle at least 60 KG before installing the server into a tank.
Only licensed professionals are authorized to access the restricted access location.
The power supply fan is disabled by default, so the server must be immersed in the fluid before powering on.
Consult with immersion cooling tank vendor to ensure compatibility and read their tank manual thoroughly.
DANGER!
Strongly recommended to use gloves when handling the coolant.
Before handling coolant, handlers must read the material safety data sheet (MSDS) for their safety.
The thermal pad contains Indium foil, so it is strongly recommended to use gloves
when replacing the thermal pad.
Installation
1 Attach the two carabiners to server handles.
2 Put the server into the tank vertically.
gigabyteserver
1
@GIGABYTESERVER
1
2
GIGABYTE
GIGABYTEChannel
Advertisement
Related Manuals for Gigabyte G292
Summary of Contents for Gigabyte G292
- Page 1 How To Install a Server into a Tank G292 Installing Server CAUTION! Make sure the crane can handle at least 60 KG before installing the server into a tank. Only licensed professionals are authorized to access the restricted access location.
- Page 2 Installing Optional Handles NOTE! The optional handles are only for Asperitas tank. 1 Attach the handles to server. 2 Secure the handles with screws. 3 Install server into the tank. gigabyteserver @GIGABYTESERVER GIGABYTE GIGABYTEChannel...
- Page 3 1 Place the thermal pad on the top of CPU. 2 Install the CPU heatsink. When installing the heatsink to CPU, use a Torx T20 screwdriver to tighten 4 captive nuts in sequence as 1-4. The screw tightening torque: 10 ± 0.5 kgf-cm. gigabyteserver @GIGABYTESERVER GIGABYTE GIGABYTEChannel...