Reason For Reissue; Description - Pulse O3-4D1L3 U2 Manual

O3-4D1L3 U2
1631, Issue 4, October 2009
A. Reason for Reissue
B. Description
Table 1. O3-4D1L3 U2 Board and OC3 Transceiver Ordering Codes
Ordering Code
A. Board (Without Transceiver)
O3-4D1L3 U2
B. Available Optical Transceivers
SFP-OC3-1471-30
SFP-OC3-1491-30
SFP-OC3-1511-30
SFP-OC3-1531-30
SFP-OC3-1551-30
SFP-OC3-1571-30
SFP-OC3-1591-30
SFP-OC3-1611-30
SFP-OC3-1310-19
SFP-OC3-1550-29
SFP-OC3-SF13-13
SFP-OC3-SF15-13
SFP-OC3-MM13-10
This practice has been reissued to update Table 1.
The O3-4D1L3 U2 multiplexes/demultiplexes four DS1 signals from an OC3 optical
signal. By using standard, non-proprietary, virtual tributary VT1.5 and synchronous
transport signal STS-1 mapping, the O3-4D1L3 U2 provides fiber-to-fiber compatibility
with synchronous optical network (SONET) multiplexers as well as far-end O3-4D1
Series units.
O3-4D1L3 U2 units do not include optical transceivers. Ordering codes for the
O3-4D1L3 U2 board as well as for available optical transceivers are shown in Table 1.
CLEI Wave-
TM
Code length
T1L93L0C —
SOOTAGGM
1471 nm
SOOTAGKM 1491 nm
SOOTAGLM 1511 nm
SOOTAGMM
1531 nm
SOOTAGNM
1551 nm
SOOTAGPM
1571 nm
SOOTAGRM
1591 nm
SOOTAGSM
1611 nm
SOOTAGTM 1310 nm
SOOTAGUM 1550 nm
SOOMAB8A 1310 nm
SOOMAB9A 1550 nm
SOOTAHMM 1310 nm
For the remainder of this document, the O3-4D1L3 U2 will be referred to
as the O3-4D1L3.
Link Maximum
Loss Output
Budget Level
— —
*
*
*
*
29 dB 0 dBm
*
*
*
*
19 dB –8 dBm
29 dB 0 dBm
13 dB –8 dBm
10 dB –14 dBm
*
CWDM
NOTE
2
Maximum
Input Number
Level of Fibers
— —
–8 dBm 2
–7 dBm
2
0 dBm
0 dBm 1
–14 dBm 2 Multi-Mode
Type
of Fiber
—
Single-
Mode