Table of Contents
Advertisement
8.8
Technical specifications of graphic
See the note in "Applicability of technical specifications (Page 74)".
Graphics controller
Resolutions/frequencies/colors
8.9
Technical specifications of the interfaces
Observe the information in "Applicability of technical specifications (Page 74)" and use only
original connections of the I/O to be connected.
DisplayPort
Keyboard
Mouse
USB
Ethernet
COM1, COM2 (optional)
Free slots for expansion cards (see Bus board (Page 96))
1
2
3
4
5
SIMATIC IPC BX-39A
Operating Instructions, 07/2022, A5E50715883-AA
1
2
An analog monitor can be used with an adapter cable (optional).
For unambiguous labeling, the Ethernet interfaces are numbered on the enclosure. The numbering
by the operating system can differ.
No teaming with AMT.
When using AMT, the interface X1 P1 must be used for connection to remote maintenance.
Only possible with ports X1 P1 and X2 P1
Intel® UHD Graphics 16 EUs:
•
Intel® Celeron® 6600HLE
•
Intel® Xeon® W-11155MLE
Intel® UHD Graphics 32 EUs:
•
Intel® Xeon® W-11865MLE
•
Intel® Xeon® W-11555MLE
DisplayPort: Max. 4096 × 2304 / 60 Hz / 36 bits
2 x connection of DisplayPort monitor
USB support
USB support
4 × USB 3.2 Gen 2 type A, high current, backward compatible
4 × Ethernet interface (RJ45), 10/100/1000 Mbps
•
1 x Ethernet 1: Intel® Jacksonville i219-LM; AMT-capable
•
1 x Ethernet 2: Intel® Springville i210-IT
•
2 x Ethernet 3, 4: Intel® EC 1000S
Wake on LAN, Remote Boot and the following Teaming modes are sup-
ported
:
5
•
Adapter Fault Tolerance (AFT)
•
Adaptive Load Balancing (ALB)
•
IEEE 802.3ad Dynamic Link Aggregation (DLA)
•
Static Link Aggregation (SLA)
•
Switch Fault Tolerance (SFT)
RS232/RS422/RS485, 115 kbps max., 9-pin SUB-D, male
Technical specifications
8.8 Technical specifications of graphic
3, 4
81
Advertisement
Table of Contents
