Wiring Up; Wiring And Block Diagram - Siemens SIMATIC ET 200SP 6ES7134-6GD01-0BA1 Manual

Wiring up

3.1

Wiring and block diagram

This section includes the block diagram of the AI 4xI 2-/4-wire ST module with the various
terminal assignments for a 2-wire and 4-wire connection.
You can find information on wiring the BaseUnit in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Note
You can use and combine the different wiring options for all channels.
Note
The load group of the module must begin with a light BaseUnit. Keep this in mind also during
the configuration.
14
Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD01-0BA1)
Equipment Manual, 06/2020, A5E03551866-AF
3